You are viewing: Products » Solar Water Heating Products » Sensors
Wind SensorFor wind speeds up to 140km/h, max. deviation 5%, signal pulse 1Hz per 20km/h. Note: As it does not have a...
Electronic pressure sensorElectronic pressure sensor with integrated temperature sensor for heat quantity measurement. Signal 0.35V to 3.5V for 0.6bar (+/-2%) 0.35V to 3.5V...
Flow switchThe flow switch is used as a detector for sanitary water heating. It switches when the flow reaches approx. 1.5 litres/minute, has a...
Solar radiation sensorFor recording solar radiation in Watts/m², 10% accuracy. System tracker can be built using two sensors. Measuring amplifier converts sensor signal in...
Rain sensorFor weather dependent control tasks. Measuring amplifier converts sensor signal into temperature. Part # 01/RES01 Rain sensor manual
ThermocoupleRecords temperatures up to 600deg.C. Measuring amplifier converts to deg.C x 10. Part # 01/THEL Thermocouple Manual
Measuring amplifier for thermocoupleMeasuring amplifier for thermocouple type K (without thermocouple). Part # 01/THEL-MV
KTY Collector sensor (our standard collector sensors)Temperature resistant sensor with 2m silicon cable, supplied with connection box and surge arrester. Up to 180deg.C Part # 01/KF Sensor Spec...
KTY Cylinder sensor (our standard cylinders sensors)Temperature sensor with 2m cable, up to 90deg.C Part # 01/BF Sensor Spec Sheet
PT1000 Collector sensorTemperature sensor with 2m cable, up to 270deg.C for short periods. Part # 01/KFPT1000 Sensor spec sheet
PT1000 Cylinder sensorTemperature sensor with 2m cable, high accuracy up to 180deg.C Part # 01/BFPT1000 Sensor spec sheet
Room temperature sensorThumbwheel allows temperatures to be altered by 5deg.C Part # 01/RAS Sensor spec sheet
Outdoor temperature sensorTemperature sensor and integrated surge voltage protection. Part # 01/AUS
Room humidity sensorIndicates room relative humidity or dew point, select via jumper, displays as temperature 0-100deg.C Part # 01/RFS Humidity Sensor Manual
AC DC converterSignal converter AC to DC to connect to a controller to show a signal is on or off AC DC converter...
Voltage to pulse converterIf there is an input of 230V at the converter, the output will be one pulse per second. Art.Nr.*01/AC/IP-KONVERTER*